Fiber-coupled Lasers series 51nanoFI-N with Faraday isolator (PM)

Low coherence laser source with polarization-maintaining fiber cable (OEM version)

Representative product images. Individual product images are found on the individual product pages.


Laser Diode Beam Sources of type 51nanoFI-N have reduced power noise, reduced coherence length and lowered speckle.
  • OEM version without key switch nor interlock and not conforming to EN 60825-1
  • Integrated Faraday isolator for feedback protection (>30 dB)
  • Reduced power noise: typ. < 0.15 % of Po (RMS, Bandwidth < 1 MHz))
  • Reduced coherence length: Coherence length ≈ 300 µm
  • Reduced speckle contrast
  • Various wavelengths from 405 nm to 1550 nm
  • Laser output power up to 27 mW
  • Polarization-maintaining fiber cable (Polarization Extinction Ratio PER ≥ 23 dB (for λ < 600 nm ≥ 21 dB))
  • FC APC connector (8°-polish), optional DIN AVIO or E-2000, end caps for wavelengths < 635 nm
  • Beam profile is rotationally symmetric with Gaussian intensity distribution
Alternative: Laser Diode Beam Source 51nanoFI-S (with key switch and interlock)
  • Low noise, low coherence laser module (typ. < 0.15 % of Po (RMS, Bandwidth < 1 MHz))
  • OEM Version
  • With integrated Faraday isolator


The fiber-coupled Laser Diode Beam Sources of type 51nanoFI-N (OEM version) have reduced power noise (typ. < 0.15 % of Po (RMS, Bandwidth < 1 MHz)), reduced coherence length (≈ 300 µm) and a lowered speckle contrast. Additionally sources of type 51nanoFI have an integrated Faraday isolator to protect the laser source from back-­reflection.

Electrical features
The output power is adjustable using a potentiometer (with protective cap) or using the two modulation inputs for analog and TTL. The electrical cable is 1.5 m long. There are two possible supply voltages 5 V or 12 V. Other electrical cables and connectors on request.

More details on electronics type: HP, H.

Fiber cable
The source is fiber-coupled to a polarization-maintaining fiber cable (standard, polarization extinction ratio > 23 dB). As a result the beam profile is rotationally symmetric with Gaussian intensity distribution and a linear state of polarization. The fiber cable is equipped with an FC APC connector (8°-polish). Fiber connectors with end caps are used for wavelengths < 635 nm. The fiber cables have strain-relief and protective sleeving (Ø 3 mm). Standard cable length is 150 cm.

Fiber Options:

  • Other connector types including DIN, AVIO or E2000
  • Other fiber lengths
  • Incorporated vacuum feed-through

Faraday isolator
Faraday isolators are used to protect the laser sources from back-reflection, which causes mode hopping, laser noise, frequency instability and a shorter laser lifetime. The Faraday isolator has a high isolation > 30 dB.

Laser safety
This OEM version has no key switch or interlock and is not conform to EN 60825-1.
It can be operated conform to EN 60825-1 by means of a switchbox.
As an alternative, a version with key switch and with interlock (conform to EN 60825-1) is available
as type 51nanoFI-S

Technical data

Fiber-coupled Lasers series 51nanoFI-N with Faraday isolator (PM)

405 nm - 1550 nm
Power noise
typ. < 0.15 % of Po (RMS, BW < 1 MHz)
Coherence length
≈ 300 µm
Fiber cable
Fiber cable length
1.5 m (standard)
Fiber connector type
FC APC (standard)
Supply voltage
5 V or 12 V
Electr. cable length
1.5 m (standard)
Connector type (5V)
Lumberg SV30 IEC 61076-2-106
Connector type (12V)
Lumberg SV40 IEC 61076-2-106
Cable type
shielded 4 x 0.14 mm2
analog and TTL
Operating temperature
15 - 35°C ± 0.5°C

Order Options

Order CodeWavelengthTyp.Output Power PoSupply VoltageFiber TypeConnectorEnd capElectronics TypeLaser ClassCasing Type
51nanoFI-N-405-1-Y07-P-12-4-28-0-150405 nm0.9 mW12 VPolarization-maintainingFC APCxHP2N1
51nanoFI-N-405-13-M29-P-12-4-28-0-150405 nm13 mW12 VPolarization-maintainingFC APCxHP3BN1
51nanoFI-N-445-15-G02-P-12-4-28-0-150445 nm15 mW12 VPolarization-maintainingFC APCxHP3BN1
51nanoFI-N-520-6-O08-P-12-4-28-0-150520 nm6 mW12 VPolarization-maintainingFC APCxHP3BN1
51nanoFI-N-635-1-H10-P-5-2-28-0-150635 nm0.9 mW5 VPolarization-maintainingFC APC H2N1
51nanoFI-N-640-15-H21-P-5-2-28-0-150640 nm15 mW5 VPolarization-maintainingFC APC H3BN1
51nanoFI-N-660-1-M01-P-5-2-28-0-150660 nm0.9 mW5 VPolarization-maintainingFC APC H2N1
51nanoFI-N-660-25-H26-P-5-2-28-0-150660 nm25 mW5 VPolarization-maintainingFC APC H3BN1
51nanoFI-N-785-10-Q06-P-5-2-28-0-150785 nm10 mW5 VPolarization-maintainingFC APC H3BN2
51nanoFI-N-808-16-G15-P-5-2-28-0-150808 nm16 mW5 VPolarization-maintainingFC APC H3BN1
51nanoFI-N-830-10-H19-P-5-2-28-0-150830 nm10 mW5 VPolarization-maintainingFC APC H3BN1
51nanoFI-N-850-15-TH11-P-5-2-28-0-150850 nm15 mW5 VPolarization-maintainingFC APC H3BN1
51nanoFI-N-980-2-TH4-P-5-2-28-0-150980 nm2 mW5 VPolarization-maintainingFC APC H3RN2
51nanoFI-N-1064-8-Q05-P-5-2-28-0-1501064 nm8 mW5 VPolarization-maintainingFC APC H3BN2
51nanoFI-N-1310-2-M14-P-5-2-28-0-1501310 nm2 mW5 VPolarization-maintainingFC APC H1N1
51nanoFI-N-1550-4-Q04-P-5-2-28-0-1501550 nm4 mW5 VPolarization-maintainingFC APC H1N1
Other types e.g. with single-mode fiber cable are available.                 


Article_51Nano.pdf (Technote)

This downloads section only includes general downloads for the complete series.
Please access the individual product pages (using the product configurator, the product list, order options or the search button if you have a complete order code). Here you will find specific downloads including technical drawings or stepfiles.


Power Supply 12 V
Power Supply 5 V