SMC-460-3-10E/20-xxx

The main features of the fiber cable type SMC-460-3-10E/20-xxx (also known as SMC-E-460-3.5-NA013-3-OPC.EC/OPC-0-xxx) include

Fiber
The fiber is a single-mode fiber, defined by its NA and its cut-off wavelength. The nominal NA is 0.13 and is specified by the fiber manufacturer. Additionally the effective numerical aperture NAe² is measured for each fiber batch by Schäfter + Kirchhoff. The fiber has an effective numerical aperture NAe² of 0.085 and a cut-off wavelength λ_co of 450 nm. Maximum wavelength is 600 nm. Besides the nominal cut-off wavelength λ_co, Schäfter + Kirchhoff also offers measured data for the cut-off wavelength for each individual fiber cable.

Fiber cable
The fiber cable has a 3 mm jacket in black with Kevlar strain-relief and a length of xx cm.

Fiber Connectors
The fiber cable is equipped with a fiber connector of type FC PC (0 deg polish, end cap, wide key) at the one end and a fiber connector of type FC PC (0 deg polish, narrow key) at the other end. All of the fiber connectors of type FC have an alignment index (key). The wide key (type "N") fiber connector has an alignment index (key) of 2.14 mm width. The narrow key (type "R") fiber connector has an alignment index (key) of 2 mm width.

End Caps
The fiber is equipped with an end cap connector. This means that a short length of fiber (< 300 µm) without a core is spliced onto the polarization-maintaining fiber. Without a fiber core to confine the beam, the mode field diameter of the beam already starts to diverge within the fiber end cap, significantly reducing the power density at the fiber end-face.