Start // Laser for Machine Vision // Llg // 13MM-M125-4+55CM-685-27-H13-T12-C-6


Laser Macro Focus Generator with approx. circular beam profile


Laser spot with approx. circular beam profile and extended depth of focus.
  • Spot diameter: 0.041 x 0.036 mm
  • Wavelength: 685 nm
  • Working distance: 111 mm
  • Depth of focus: 2.98 mm
  • Macro Focus Generator for extended depth of focus


The laser diode beam source type 13MM-M125-4+55CM-685-27-H13-T12-C-6 produces a circular laser spot with extended depth of focus. The beam profile is approx. Gaussian. More precisely it has an elliptical intensity distribution clipped by a circular aperture.

The laser has integrated electronics type C for control of the laser output power. The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

The working distance can be adjusted by adjusting the focus setting. Please note that the spot diameter increases proportionally to the working distance. A fine-adjustment of the distance between laser and target is recommended for fine-focusing.

Technical data


Order Code
Line profile
Gaussian Intensity Distribution
685 +10/-10 nm
Laser output power
27 mW
Laser safety class
Focussing range
110-205 mm
Working distance
111 mm
Spot height
0.036 mm
Spot width
0.041 mm
Depth of focus
2.98 mm
Diameter laser module
25/28 mm
Module length
84.3 mm
Installation length
225.3 mm
Cable length
1.5 m
Connector type
Lumberg SV50 IEC 61076-2-106
Supply voltage
5 ± 0.2 V
Max. current consumption
0.25 A
Working temperature
0 - 40 °C
Modulation inputs
Input resistance
22 kOhm
22 kOhm
Max. modulation frequency
100 kHz
100 kHz
Modulation delay ON/OFF
1/0.5 µs
2/1 µs
Rise / Fall time
3/2 µs
3/2 µs


Hex key WS 1.5
Screwdriver WS 1.2
Mounting Console with flat base plate
Mounting Console with base plate with dovetail profile
Power Supply 5 V