Start // Laser for Machine Vision // Llg // Semi-telecentric Micro Line Generator by Schäfter + Kirchhoff - LNC-5LT-150-2+56CM-520-14-O11-A7.5-HP-4

LNC-5LT-150-2+56CM-520-14-O11-A7.5-HP-4

Semi-telecentric Micro Line Generator

LNC-5LT-150-2+56CM-520-14-O11-A7.5-HP-4
LNC-5LT-150-2+56CM-520-14-O11-A7.5-HP-4
Micro Line Generator for small laser line widths and high power density in the focal planeMicro
Line
Low noise, low coherence laser moduleLow
Coherence

Features

Semi-telecentric laser line with constant line length of 2.4 mm.
  • Line length: 2.4 mm
  • Line width: 22 µm
  • Wavelength: 520 nm
  • Working distance: 145 mm
  • Low noise laser module (0.1 % RMS, @<1 MHz)

Description

The laser diode beam source type LNC-5LT-150-2+56CM-520-14-O11-A7.5-HP-4 produces a semi-telecentric laser line with 2.4 mm line length. In this case the line length is given on the 13.5%-level. The intensity profile is Gaussian in line direction and the line is truncated at 4.8 mm. The line width is constant along the laser line. Across the laser line the intensity distribution is Gaussian.

The laser has integrated electronics type HP with micro-controller for control of the laser output power. It is a low noise laser source (0.1 % RMS,@<1 MHz) with reduced coherence length and operates mode-hopping free. Due to the reduced coherence length the speckle contrast might be lowered. Please note that this effect is smaller for smaller lines and spots. The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

For this laser type the working distance is fixed. A fine-adjustment of the distance between laser and target is recommended for fine-focusing in order to achieve minimal line width.

Technical data

LNC-5LT-150-2+56CM-520-14-O11-A7.5-HP-4

Series
5LT
Order Code
LNC-5LT-150-2+56CM-520-14-O11-A7.5-HP-4
Line profile
Gaussian Intensity Distribution
Line type
Laser Micro Line
Wavelength
520 +10/-5 nm
Laser output power
14 mW
Laser safety class
3B
Focussing range
145-145 mm
Working distance
145 mm
Line length
2.4 mm
Line width
0.022 mm
Rayleigh range
1.47 mm
Edge intensity
18 %
Diameter laser module
25/28 mm
Module length
82.6 mm
Installation length
257.6 mm
Cable length
1.5 m
Connector type
Lumberg SV40 IEC 61076-2-106
Supply voltage
12 ± 0.5 V
Max. current consumption
0.3 A
Working temperature
15 - 40 °C
Modulation inputs
Analog
TTL
Input resistance
9 kOhm
9 kOhm
Max. modulation frequency
0.001 kHz
300 kHz
Modulation delay ON/OFF
2000/500 µs
0.5/0.2 µs
Rise / Fall time
200000/200000 µs
0.8/0.3 µs
Noise (< 1 MHZ RMS)
0.1 %

Downloads

Benefits of user registration include

  • Extended information for download including stepfiles, software or manuals
  • Direct download of user-specific downloads (e.g. user-specific software)
  • Access to previous online requests and the possibility to add complete previous lists to the "Request for quote" list
  • Stored item list
Click here to register.

Accessories

9D-12
Screwdriver WS 1.2
13MK-25-36-10-F
Mounting Console with flat base plate
13MK-25-36-10-M
Mounting Console with base plate with dovetail profile
PS120516E
Power Supply 12 V