Start // Laser for Machine Vision // Llg // Low Noise Micro Line Generator with a large fan angle by Schäfter + Kirchhoff - LNC-5LP80-S325+56CR-660-8-M01-A8-H-6

LNC-5LP80-S325+56CR-660-8-M01-A8-H-6

Low Noise Micro Line Generator with a large fan angle

LNC-5LP80-S325+56CR-660-8-M01-A8-H-6
LNC-5LP80-S325+56CR-660-8-M01-A8-H-6
Micro Line Generator for small laser line widths and high power density in the focal planeMicro
Line
Low noise, low coherence laser moduleLow
Coherence

Features

Laser line with a large fan angle and Gaussian intensity distribution.
  • Line length: 565 mm
  • Line width: 122 µm
  • Wavelength: 660 nm
  • Working distance: 317 mm
  • Low noise laser module (0.1 % RMS, @<1 MHz)

Description

The laser diode beam source type LNC-5LP80-S325+56CR-660-8-M01-A8-H-6 has a fan angle of 84°.

The intensity profile is Gaussian in line direction clipped by an aperture with an edge intensity of 15 %. The line width is constant along the laser line. Across the laser line the intensity distribution is Gaussian.

The laser has integrated electronics type H for control of the laser output power. It is a low noise laser source (0.1 % RMS,@<1 MHz) with reduced coherence length and operates mode-hopping free. Due to the reduced coherence length the speckle contrast might be lowered. Please note that this effect is smaller for smaller lines and spots. The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

The working distance can be adjusted by adjusting the focus setting. Please note that beam parameters like line length and line width increase proportionally to the working distance. A fine-adjustment of the distance between laser and target is recommended for fine-focusing.

Technical data

LNC-5LP80-S325+56CR-660-8-M01-A8-H-6

Series
5LP
Order Code
LNC-5LP80-S325+56CR-660-8-M01-A8-H-6
Line profile
Gaussian Intensity Distribution
Line type
Laser Micro Line
Wavelength
660 +5/-5 nm
Laser output power
8 mW
Laser safety class
3B
Fan angle α
84 deg
Focussing range
260-430 mm
Working distance
317 mm
Line length
565 mm
Line width
0.122 mm
Rayleigh range
35.2 mm
Edge intensity
15 %
Diameter laser module
25/28 mm
Module length
98.6 mm
Installation length
415.6 mm
Cable length
1.5 m
Connector type
Lumberg SV50 IEC 61076-2-106
Supply voltage
5 ± 0.25 V
Max. current consumption
0.25 A
Working temperature
0 - 40 °C
Modulation inputs
Analog
TTL
Input resistance
22 kOhm
22 kOhm
Max. modulation frequency
100 kHz
100 kHz
Modulation delay ON/OFF
2/0.3 µs
1.5/0.1 µs
Rise / Fall time
1/1 µs
1/1 µs
Noise (< 1 MHZ RMS)
0.1 %

Accessories

50HD-15
Hex key WS 1.5
9D-12
Screwdriver WS 1.2
13MK-25-36-10-F
Mounting Console with flat base plate
13MK-25-36-10-M
Mounting Console with base plate with dovetail profile
PS051003E
Power Supply 5 V