Start // Laser for Machine Vision // Llg // Low Noise Laser Micro Focus Generator with elliptical Gaussian beam profile by Schäfter + Kirchhoff - LNC-13M-S000+56CM-635-5-H10-T15-H-6

LNC-13M-S000+56CM-635-5-H10-T15-H-6

Low Noise Laser Micro Focus Generator with elliptical Gaussian beam profile

LNC-13M-S000+56CM-635-5-H10-T15-H-6
LNC-13M-S000+56CM-635-5-H10-T15-H-6
Micro Focus Generator for small spot widths and high power density in the focal planeMicro
Focus
Low noise, low coherence laser moduleLow
Coherence

Features

Laser spot with elliptical Gaussian beam profile.
  • Spot diameter: 0.135 x 0.456 mm
  • Wavelength: 635 nm
  • Working distance: 2000 mm
  • Low noise laser module (0.1 % RMS, @<1 MHz)

Description

The laser diode beam source type LNC-13M-S000+56CM-635-5-H10-T15-H-6 produces an elliptical laser spot with elliptical Gaussian intensity distribution.

The laser has integrated electronics type H for control of the laser output power. It is a low noise laser source (0.1 % RMS,@<1 MHz) with reduced coherence length and operates mode-hopping free. Due to the reduced coherence length the speckle contrast might be lowered. Please note that this effect is smaller for smaller lines and spots. The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

The working distance can be adjusted by adjusting the focus setting. Please note that the spot diameter increases proportionally to the working distance. A fine-adjustment of the distance between laser and target is recommended for fine-focusing.

Technical data

LNC-13M-S000+56CM-635-5-H10-T15-H-6

Series
13M
Order Code
LNC-13M-S000+56CM-635-5-H10-T15-H-6
Line profile
Gaussian Intensity Distribution
Wavelength
635 +10/-10 nm
Laser output power
5 mW
Laser safety class
3R
Focussing range
1295-inf mm
Working distance
2000 mm
Spot height
0.456 mm
Spot width
0.135 mm
Rayleigh range
44.9 mm
Diameter laser module
25/28 mm
Module length
85.4 mm
Installation length
2115.4 mm
Cable length
1.5 m
Connector type
Lumberg SV50 IEC 61076-2-106
Supply voltage
5 ± 0.2 V
Max. current consumption
0.25 A
Working temperature
0 - 40 °C
Modulation inputs
Analog
TTL
Input resistance
22 kOhm
22 kOhm
Max. modulation frequency
100 kHz
100 kHz
Modulation delay ON/OFF
2/0.3 µs
1.5/0.1 µs
Rise / Fall time
1/1 µs
1/1 µs
Noise (< 1 MHZ RMS)
0.1 %

Downloads

Benefits of user registration include

  • Extended information for download including stepfiles, software or manuals
  • Direct download of user-specific downloads (e.g. user-specific software)
  • Access to previous online requests and the possibility to add complete previous lists to the "Request for quote" list
  • Stored item list
Click here to register.

Accessories

50HD-15
Hex key WS 1.5
9D-12
Screwdriver WS 1.2
13MK-25-36-10-F
Mounting Console with flat base plate
13MK-25-36-10-M
Mounting Console with base plate with dovetail profile
PS051003E
Power Supply 5 V