Start // Laser for Machine Vision // Llg // 5LPM60-S150-1+55CM-639-13-H18-A8-CS-7


Macro Line Generator with a large fan angle


Laser line with a large fan angle, Gaussian intensity distribution and extended depth of focus.
  • Line length: 168 mm
  • Line width: 140 µm
  • Wavelength: 639 nm
  • Working distance: 142 mm
  • Depth of focus: 64.1 mm
  • Macro Line Generator for extended depth of focus
  • With RS232 interface


The laser diode beam source type 5LPM60-S150-1+55CM-639-13-H18-A8-CS-7 has a fan angle of 62° and an extended depth of focus.

The intensity profile is Gaussian in line direction clipped by an aperture with an edge intensity of 38 %. The line width is constant along the laser line. Across the laser line the intensity distribution is approx. Gaussian.

The laser has integrated electronics type CS for control of the laser output power and serial interface (RS232). The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

The working distance can be adjusted by adjusting the focus setting. Please note that beam parameters like line length and line width increase proportionally to the working distance. A fine-adjustment of the distance between laser and target is recommended for fine-focusing.

Technical data


Order Code
Line profile
Gaussian Intensity Distribution
Line type
Laser Macro Line
639 +10/-10 nm
Laser output power
13 mW
Laser safety class
Fan angle α
62 deg
Focussing range
120-255 mm
Working distance
142 mm
Line length
168 mm
Line width
0.14 mm
Depth of focus
64.1 mm
Edge intensity
38 %
Diameter laser module
25/28 mm
Module length
87.3 mm
Installation length
259.3 mm
Cable length
1.5 m
Connector type
Lumberg SV70 IEC 61076-2-106
Supply voltage
5 ± 0.2 V
Max. current consumption
0.25 A
Working temperature
0 - 40 °C
Modulation inputs
Input resistance
9 kOhm
9 kOhm
Max. modulation frequency
0.001 kHz
250 kHz
Modulation delay ON/OFF
3000/3000 µs
0.5/0.2 µs
Rise / Fall time
200000/200000 µs
0.8/0.4 µs


Hex key WS 1.5
Screwdriver WS 1.2
Mounting Console with flat base plate
Mounting Console with base plate with dovetail profile
Power Supply 5 V for laser modules with RS232 interface