Start // Laser for Machine Vision // Llg // 5LPM40-S150-1+55CM-685-24-H13-A8-CS-7


Macro Line Generator with a large fan angle


Laser line with a large fan angle, Gaussian intensity distribution and extended depth of focus.
  • Line length: 101 mm
  • Line width: 148 µm
  • Wavelength: 685 nm
  • Working distance: 142 mm
  • Depth of focus: 68.7 mm
  • Macro Line Generator for extended depth of focus
  • With RS232 interface


The laser diode beam source type 5LPM40-S150-1+55CM-685-24-H13-A8-CS-7 has a fan angle of 40° and an extended depth of focus.

The intensity profile is Gaussian in line direction clipped by an aperture with an edge intensity of 14 %. The line width is constant along the laser line. Across the laser line the intensity distribution is approx. Gaussian.

The laser has integrated electronics type CS for control of the laser output power and serial interface (RS232). The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

The working distance can be adjusted by adjusting the focus setting. Please note that beam parameters like line length and line width increase proportionally to the working distance. A fine-adjustment of the distance between laser and target is recommended for fine-focusing.

Technical data


Order Code
Line profile
Gaussian Intensity Distribution
Line type
Laser Macro Line
685 +10/-10 nm
Laser output power
24 mW
Laser safety class
Fan angle α
40 deg
Focussing range
120-255 mm
Working distance
142 mm
Line length
101 mm
Line width
0.148 mm
Depth of focus
68.7 mm
Edge intensity
14 %
Diameter laser module
25/28 mm
Module length
95.5 mm
Installation length
267.5 mm
Cable length
1.5 m
Connector type
Lumberg SV70 IEC 61076-2-106
Supply voltage
5 ± 0.2 V
Max. current consumption
0.25 A
Working temperature
0 - 40 °C
Modulation inputs
Input resistance
9 kOhm
9 kOhm
Max. modulation frequency
0.001 kHz
250 kHz
Modulation delay ON/OFF
3000/3000 µs
0.5/0.2 µs
Rise / Fall time
200000/200000 µs
0.8/0.4 µs


Hex key WS 1.5
Screwdriver WS 1.2
Mounting Console with flat base plate
Mounting Console with base plate with Montech® profile
Power Supply 5 V for laser modules with RS232 interface
For laser diode modules with RS232 interface