Start // Laser for Machine Vision // Llg // 5LP80-S000+55CM-640-27-H22-A8-C-6

5LP80-S000+55CM-640-27-H22-A8-C-6

Micro Line Generator with a large fan angle

Features

Laser line with a large fan angle and Gaussian intensity distribution.
  • Line length: 1800 mm
  • Line width: 383 µm
  • Wavelength: 640 nm
  • Working distance: 1000 mm
  • Micro Line Generator for small laser line widths and high power density in the focal plane

Description

The laser diode beam source type 5LP80-S000+55CM-640-27-H22-A8-C-6 has a fan angle of 84°.

The intensity profile is Gaussian in line direction clipped by an aperture with an edge intensity of 13 %. The line width is constant along the laser line. Across the laser line the intensity distribution is Gaussian.

The laser has integrated electronics type C for control of the laser output power. The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

The working distance can be adjusted by adjusting the focus setting. Please note that beam parameters like line length and line width increase proportionally to the working distance. A fine-adjustment of the distance between laser and target is recommended for fine-focusing.

Technical data

5LP80-S000+55CM-640-27-H22-A8-C-6

Series
5LP
Order Code
5LP80-S000+55CM-640-27-H22-A8-C-6
Line profile
Gaussian Intensity Distribution
Line type
Laser Micro Line
Wavelength
640 +5/-5 nm
Laser output power
27 mW
Laser safety class
3B
Fan angle α
84 deg
Focussing range
430-inf mm
Working distance
1000 mm
Line length
1800 mm
Line width
0.383 mm
Rayleigh range
360 mm
Edge intensity
13 %
Diameter laser module
25/28 mm
Module length
86.1 mm
Installation length
1116.1 mm
Cable length
1.5 m
Connector type
Lumberg SV50 IEC 61076-2-106
Supply voltage
5 ± 0.2 V
Max. current consumption
0.25 A
Working temperature
0 - 40 °C
Modulation inputs
Analog
TTL
Input resistance
22 kOhm
22 kOhm
Max. modulation frequency
100 kHz
100 kHz
Modulation delay ON/OFF
1/0.5 µs
2/1 µs
Rise / Fall time
3/2 µs
3/2 µs

Accessories

Hex key WS 1.5
Screwdriver WS 1.2
Mounting Console with flat base plate
Mounting Console with base plate with Montech® profile
Power Supply 5 V
For laser diode beam sources of electronics type S/C/P/H and 5 V power supply