Start // Laser for Machine Vision // Llg // 5LP60-S88+55CM-635-9-H10-A8-C-6

5LP60-S88+55CM-635-9-H10-A8-C-6

Micro Line Generator with a large fan angle

Features

Laser line with a large fan angle and Gaussian intensity distribution.
  • Line length: 92 mm
  • Line width: 38 µm
  • Wavelength: 635 nm
  • Working distance: 82 mm
  • Micro Line Generator for small laser line widths and high power density in the focal plane

Description

The laser diode beam source type 5LP60-S88+55CM-635-9-H10-A8-C-6 has a fan angle of 62°.

The intensity profile is Gaussian in line direction clipped by an aperture with an edge intensity of 31 %. The line width is constant along the laser line. Across the laser line the intensity distribution is Gaussian.

The laser has integrated electronics type C for control of the laser output power. The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

The working distance can be adjusted by adjusting the focus setting. Please note that beam parameters like line length and line width increase proportionally to the working distance. A fine-adjustment of the distance between laser and target is recommended for fine-focusing.

Technical data

5LP60-S88+55CM-635-9-H10-A8-C-6

Series
5LP
Order Code
5LP60-S88+55CM-635-9-H10-A8-C-6
Line profile
Gaussian Intensity Distribution
Line type
Laser Micro Line
Wavelength
635 +10/-10 nm
Laser output power
9 mW
Laser safety class
3B
Fan angle α
62 deg
Focussing range
70-125 mm
Working distance
82 mm
Line length
92 mm
Line width
0.038 mm
Rayleigh range
3.49 mm
Edge intensity
31 %
Diameter laser module
25/28 mm
Module length
86.1 mm
Installation length
198.1 mm
Cable length
1.5 m
Connector type
Lumberg SV50 IEC 61076-2-106
Supply voltage
5 ± 0.2 V
Max. current consumption
0.25 A
Working temperature
0 - 40 °C
Modulation inputs
Analog
TTL
Input resistance
22 kOhm
22 kOhm
Max. modulation frequency
100 kHz
100 kHz
Modulation delay ON/OFF
1/0.5 µs
2/1 µs
Rise / Fall time
3/2 µs
3/2 µs

Accessories

Hex key WS 1.5
Screwdriver WS 1.2
Mounting Console with flat base plate
Mounting Console with base plate with Montech® profile
Power Supply 5 V
For laser diode beam sources of electronics type S/C/P/H and 5 V power supply