Start // Laser for Machine Vision // Llg // 5LP60-S000+25CM-639-17-H18-A8-S-6

5LP60-S000+25CM-639-17-H18-A8-S-6

Compact Micro Line Generator with a large fan angle

Features

Compact laser line with a large fan angle and Gaussian intensity distribution.
  • Line length: 1200 mm
  • Line width: 430 µm
  • Wavelength: 639 nm
  • Working distance: 1000 mm
  • Micro Line Generator for small laser line widths and high power density in the focal plane

Description

The laser diode beam source type 5LP60-S000+25CM-639-17-H18-A8-S-6 has a fan angle of 62°.

The intensity profile is Gaussian in line direction clipped by an aperture with an edge intensity of 40 %. The line width is constant along the laser line. Across the laser line the intensity distribution is Gaussian.

The laser has integrated electronics type S for control of the laser output power. The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

The working distance can be adjusted by adjusting the focus setting. Please note that beam parameters like line length and line width increase proportionally to the working distance. A fine-adjustment of the distance between laser and target is recommended for fine-focusing.

Technical data

5LP60-S000+25CM-639-17-H18-A8-S-6

Series
5LP
Order Code
5LP60-S000+25CM-639-17-H18-A8-S-6
Line profile
Gaussian Intensity Distribution
Line type
Laser Micro Line
Wavelength
639 +10/-10 nm
Laser output power
17 mW
Laser safety class
3B
Fan angle α
62 deg
Focussing range
430-inf mm
Working distance
1000 mm
Line length
1200 mm
Line width
0.43 mm
Rayleigh range
454 mm
Edge intensity
40 %
Diameter laser module
12 mm
Module length
73.7 mm
Installation length
1103.7 mm
Cable length
1.5 m
Connector type
Lumberg SV50 IEC 61076-2-106
Supply voltage
5 ± 0.25 V
Max. current consumption
0.25 A
Working temperature
0 - 40 °C
Modulation inputs
Analog
TTL
Input resistance
22 kOhm
22 kOhm
Max. modulation frequency
50 kHz
1000 kHz
Modulation delay ON/OFF
4/0.5 µs
0.05/0.05 µs
Rise / Fall time
5/4 µs
0.1/0.02 µs

Accessories

Eccentric key with a stroke of ± 0.5 mm.
Alternative eccentric key with long handle with a stroke of ± 0.5 mm.
Screwdriver WS 1.2
Mounting Console with flat base plate
Mounting Console with base plate with Montech® profile
Power Supply 5 V
For laser diode beam sources of electronics type S/C/P/H and 5 V power supply