Start // Laser for Machine Vision // Llg // 13LR25-S1000+55CR-635-10-H10-T12-C-6

13LR25-S1000+55CR-635-10-H10-T12-C-6

Laser Micro Line Generator with a fan angle

Features

Laser line with a fan angle and approx. uniform intensity distribution.
  • Line length: 425 mm
  • Line width: 285 µm
  • Wavelength: 635 nm
  • Working distance: 977 mm
  • Micro Line Generator for small laser line widths and high power density in the focal plane

Description

The laser diode beam source type 13LR25-S1000+55CR-635-10-H10-T12-C-6 has a fan angle of 25° with a constant line width and approx. uniform intensity distribution along the laser line.

The fine-structure is a chain of equidistant dots with a spacing of approx. the line width. The line width is constant along the laser line. Across the laser line the intensity distribution is Gaussian.

The laser has integrated electronics type C for control of the laser output power. The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

The working distance can be adjusted by adjusting the focus setting. Please note that beam parameters like line length and line width increase proportionally to the working distance.

A fine-adjustment of the distance between laser and target is recommended for fine-focusing.

Technical data

13LR25-S1000+55CR-635-10-H10-T12-C-6

Series
13LR
Order Code
13LR25-S1000+55CR-635-10-H10-T12-C-6
Line profile
Constant Intensity Distribution
Line type
Laser Micro Line
Wavelength
635 +10/-10 nm
Laser output power
10 mW
Laser safety class
3B
Fan angle α
25 deg
Focussing range
815-1295 mm
Working distance
977 mm
Line length
425 mm
Line width
0.285 mm
Rayleigh range
201 mm
Edge intensity
80 %
Diameter laser module
25/28 mm
Module length
59.9 mm
Installation length
1036.9 mm
Cable length
1.5 m
Connector type
Lumberg SV50 IEC 61076-2-106
Supply voltage
5 ± 0.2 V
Max. current consumption
0.25 A
Working temperature
0 - 40 °C
Modulation inputs
Analog
TTL
Input resistance
22 kOhm
22 kOhm
Max. modulation frequency
100 kHz
100 kHz
Modulation delay ON/OFF
1/0.5 µs
2/1 µs
Rise / Fall time
3/2 µs
3/2 µs

Accessories

Hex key WS 1.5
Screwdriver WS 1.2
Mounting Console with flat base plate
Mounting Console with base plate with Montech® profile
Power Supply 5 V
For laser diode beam sources of electronics type S/C/P/H and 5 V power supply