Start // Laser for Machine Vision // Llg // Laser Micro Line Generator with a fan angle by Schäfter + Kirchhoff - 13LR12-S1000+55CR-660-100-M25-T12-P-6


Laser Micro Line Generator with a fan angle


Laser line with a fan angle and approx. uniform intensity distribution.
  • Line length: 201 mm
  • Line width: 237 µm
  • Wavelength: 660 nm
  • Working distance: 977 mm
  • Micro Line Generator for small laser line widths and high power density in the focal plane
Micro Line Generator for small laser line widths and high power density in the focal plane


The laser diode beam source type 13LR12-S1000+55CR-660-100-M25-T12-P-6 has a fan angle of 12° with a constant line width and approx. uniform intensity distribution along the laser line.

The fine-structure is a chain of equidistant dots with a spacing of approx. the line width. The line width is constant along the laser line. Across the laser line the intensity distribution is Gaussian.

The laser has integrated electronics type P with micro-controller for control of the laser output power. The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

The working distance can be adjusted by adjusting the focus setting. Please note that beam parameters like line length and line width increase proportionally to the working distance.

A fine-adjustment of the distance between laser and target is recommended for fine-focusing.

Technical data


Order Code
Line profile
Constant Intensity Distribution
Line type
Laser Micro Line
660 +4/-6 nm
Laser output power
100 mW
Laser safety class
Fan angle α
12 deg
Focussing range
815-1295 mm
Working distance
977 mm
Line length
201 mm
Line width
0.237 mm
Rayleigh range
134 mm
Edge intensity
80 %
Diameter laser module
25/28 mm
Module length
59.9 mm
Installation length
1036.9 mm
Cable length
1.5 m
Connector type
Lumberg SV50 IEC 61076-2-106
Supply voltage
5 ± 0.2 V
Max. current consumption
0.25 A
Working temperature
15 - 40 °C
Modulation inputs
Input resistance
9 kOhm
9 kOhm
Max. modulation frequency
0.01 kHz
250 kHz
Modulation delay ON/OFF
3000/3000 µs
0.5/0.2 µs
Rise / Fall time
40000/40000 µs
0.5/0.5 µs


Hex key WS 1.5
Screwdriver WS 1.2
Mounting Console with flat base plate
Mounting Console with base plate with dovetail profile
Power Supply 5 V