Start // Laser for Machine Vision // Llg // LNC-5LTM-100-22+56CM-405-25-X15-A7.5-HP-4

LNC-5LTM-100-22+56CM-405-25-X15-A7.5-HP-4

Semi-telecentric Macro Line Generator

Features

Semi-telecentric laser line with constant line length of 2.4 mm and extended depth of focus.
  • Line length: 2.4 mm
  • Line width: 33 µm
  • Wavelength: 405 nm
  • Working distance: 91 mm
  • Depth of focus: 4.51 mm
  • Low noise laser module (0.1 % RMS, @<1 MHz)
  • Macro Line Generator for extended depth of focus
  • Low noise, low coherence laser module (typ. < 0.15 % of Po (RMS, Bandwidth < 1 MHz))

Description

The laser diode beam source type LNC-5LTM-100-22+56CM-405-25-X15-A7.5-HP-4 produces a semi-telecentric laser line with 2.4 mm line length. In this case the line length is given on the 13.5%-level. The intensity profile is Gaussian in line direction and the line is truncated at 4.8 mm. The line width is constant along the laser line. Across the laser line the intensity distribution is approx. Gaussian.

The laser has integrated electronics type HP with micro-controller for control of the laser output power. It is a low noise laser source (0.1 % RMS,@<1 MHz) with reduced coherence length and operates mode-hopping free. Due to the reduced coherence length the speckle contrast might be lowered. Please note that this effect is smaller for smaller lines and spots. The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

For this laser type the working distance is fixed. A fine-adjustment of the distance between laser and target is recommended for fine-focusing in order to achieve minimal line width.

Technical data

LNC-5LTM-100-22+56CM-405-25-X15-A7.5-HP-4

Series
5LTM
Order Code
LNC-5LTM-100-22+56CM-405-25-X15-A7.5-HP-4
Line profile
Gaussian Intensity Distribution
Line type
Laser Macro Line
Wavelength
405 +5/-5 nm
Laser output power
25 mW
Laser safety class
3B
Focussing range
91-91 mm
Working distance
91 mm
Line length
2.4 mm
Line width
0.033 mm
Depth of focus
4.51 mm
Edge intensity
10 %
Diameter laser module
25/28 mm
Module length
88 mm
Installation length
209 mm
Cable length
1.5 m
Connector type
Lumberg SV40 IEC 61076-2-106
Supply voltage
12 ± 0.5 V
Max. current consumption
0.3 A
Working temperature
15 - 40 °C
Modulation inputs
Analog
TTL
Input resistance
9 kOhm
9 kOhm
Max. modulation frequency
0.001 kHz
300 kHz
Modulation delay ON/OFF
2000/500 µs
0.5/0.2 µs
Rise / Fall time
200000/200000 µs
0.8/0.3 µs
Noise (< 1 MHZ RMS)
0.1 %

Accessories

Screwdriver WS 1.2
Mounting Console with flat base plate
Mounting Console with base plate with Montech® profile
Power Supply 12 V
For laser diode beam sources of electronics type HP and 12 V power supply