Start // Laser for Machine Vision // Llg // LNC-5LTM-100-11+56CM-785-20-Q06-A8-H-6

LNC-5LTM-100-11+56CM-785-20-Q06-A8-H-6

Semi-telecentric Macro Line Generator

Features

Semi-telecentric laser line with constant line length of 4.8 mm and extended depth of focus.
  • Line length: 4.8 mm
  • Line width: 114 µm
  • Wavelength: 785 nm
  • Working distance: 91 mm
  • Depth of focus: 35 mm
  • Low noise laser module (0.1 % RMS, @<1 MHz)
  • Macro Line Generator for extended depth of focus
  • Low noise, low coherence laser module (typ. < 0.15 % of Po (RMS, Bandwidth < 1 MHz))

Description

The laser diode beam source type LNC-5LTM-100-11+56CM-785-20-Q06-A8-H-6 produces a semi-telecentric laser line with 4.8 mm line length and extended depth of focus. The intensity profile is Gaussian in line direction clipped by an aperture with an edge intensity of 3 %. The line width is constant along the laser line. Across the laser line the intensity distribution is approx. Gaussian.

The laser has integrated electronics type H for control of the laser output power. It is a low noise laser source (0.1 % RMS,@<1 MHz) with reduced coherence length and operates mode-hopping free. Due to the reduced coherence length the speckle contrast might be lowered. Please note that this effect is smaller for smaller lines and spots. The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

For this laser type the working distance is fixed. A fine-adjustment of the distance between laser and target is recommended for fine-focusing in order to achieve minimal line width.

Technical data

LNC-5LTM-100-11+56CM-785-20-Q06-A8-H-6

Series
5LTM
Order Code
LNC-5LTM-100-11+56CM-785-20-Q06-A8-H-6
Line profile
Gaussian Intensity Distribution
Line type
Laser Macro Line
Wavelength
785 +10/-10 nm
Laser output power
20 mW
Laser safety class
3B
Focussing range
91-91 mm
Working distance
91 mm
Line length
4.8 mm
Line width
0.114 mm
Depth of focus
35 mm
Edge intensity
3 %
Diameter laser module
25/28 mm
Module length
88 mm
Installation length
209 mm
Cable length
1.5 m
Connector type
Lumberg SV50 IEC 61076-2-106
Supply voltage
5 ± 0.2 V
Max. current consumption
0.25 A
Working temperature
0 - 40 °C
Modulation inputs
Analog
TTL
Input resistance
22 kOhm
22 kOhm
Max. modulation frequency
100 kHz
100 kHz
Modulation delay ON/OFF
2/0.3 µs
1.5/0.1 µs
Rise / Fall time
1/1 µs
1/1 µs
Noise (< 1 MHZ RMS)
0.1 %

Accessories

Screwdriver WS 1.2
Mounting Console with flat base plate
Mounting Console with base plate with Montech® profile
Power Supply 5 V
For laser diode beam sources of electronics type S/C/P/H and 5 V power supply