Start // Laser for Machine Vision // Llg // Low Noise Macro Line Generator with a large fan angle by Schäfter + Kirchhoff - LNC-5LPM80-S325-1+56CM-405-25-X15-A7.5-HP-4

LNC-5LPM80-S325-1+56CM-405-25-X15-A7.5-HP-4

Low Noise Macro Line Generator with a large fan angle

Features

Laser line with a large fan angle, Gaussian intensity distribution and extended depth of focus.
  • Line length: 565 mm
  • Line width: 191 µm
  • Wavelength: 405 nm
  • Working distance: 312 mm
  • Depth of focus: 191 mm
  • Low noise laser module (0.1 % RMS, @<1 MHz)
  • Macro Line Generator for extended depth of focus
  • Low noise, low coherence laser module (typ. < 0.15 % of Po (RMS, Bandwidth < 1 MHz))
Macro Line Generator for extended depth of focusLow noise, low coherence laser module

Description

The laser diode beam source type LNC-5LPM80-S325-1+56CM-405-25-X15-A7.5-HP-4 has a fan angle of 84° and an extended depth of focus.

The intensity profile is Gaussian in line direction clipped by an aperture with an edge intensity of 10 %. The line width is constant along the laser line. Across the laser line the intensity distribution is approx. Gaussian.

The laser has integrated electronics type HP with micro-controller for control of the laser output power. It is a low noise laser source (0.1 % RMS,@<1 MHz) with reduced coherence length and operates mode-hopping free. Due to the reduced coherence length the speckle contrast might be lowered. Please note that this effect is smaller for smaller lines and spots. The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

The working distance can be adjusted by adjusting the focus setting. Please note that beam parameters like line length and line width increase proportionally to the working distance. A fine-adjustment of the distance between laser and target is recommended for fine-focusing.

Technical data

LNC-5LPM80-S325-1+56CM-405-25-X15-A7.5-HP-4

Series
5LPM
Order Code
LNC-5LPM80-S325-1+56CM-405-25-X15-A7.5-HP-4
Line profile
Gaussian Intensity Distribution
Line type
Laser Macro Line
Wavelength
405 +5/-5 nm
Laser output power
25 mW
Laser safety class
3B
Fan angle α
84 deg
Focussing range
255-450 mm
Working distance
312 mm
Line length
565 mm
Line width
0.191 mm
Depth of focus
191 mm
Edge intensity
10 %
Diameter laser module
25/28 mm
Module length
101 mm
Installation length
443 mm
Cable length
1.5 m
Connector type
Lumberg SV40 IEC 61076-2-106
Supply voltage
12 ± 0.5 V
Max. current consumption
0.3 A
Working temperature
15 - 40 °C
Modulation inputs
Analog
TTL
Input resistance
9 kOhm
9 kOhm
Max. modulation frequency
0.001 kHz
300 kHz
Modulation delay ON/OFF
2000/500 µs
0.5/0.2 µs
Rise / Fall time
200000/200000 µs
0.8/0.3 µs
Noise (< 1 MHZ RMS)
0.1 %

Accessories

50HD-15
Hex key WS 1.5
9D-12
Screwdriver WS 1.2
13MK-25-36-10-F
Mounting Console with flat base plate
13MK-25-36-10-M
Mounting Console with base plate with dovetail profile
PS120516E
Power Supply 12 V