Start // Laser for Machine Vision // Llg // Low Noise Micro Line Generator with a fan angle by Schäfter + Kirchhoff - LNC-5LM15-S88+56CM-785-2-M10-A8-H-6

LNC-5LM15-S88+56CM-785-2-M10-A8-H-6

Low Noise Micro Line Generator with a fan angle

LNC-5LM15-S88+56CM-785-2-M10-A8-H-6
LNC-5LM15-S88+56CM-785-2-M10-A8-H-6
Micro Line Generator for small laser line widths and high power density in the focal planeMicro
Line
Low noise, low coherence laser moduleLow
Coherence

Features

Laser line with a fan angle and Gaussian intensity distribution.
  • Line length: 21.9 mm
  • Line width: 34 µm
  • Wavelength: 785 nm
  • Working distance: 78 mm
  • Low noise laser module (0.1 % RMS, @<1 MHz)

Description

The laser diode beam source type LNC-5LM15-S88+56CM-785-2-M10-A8-H-6 has a fan angle of 15°.

The intensity profile is Gaussian in line direction clipped by an aperture with an edge intensity of 33 %. The line width is constant along the laser line. Across the laser line the intensity distribution is Gaussian.

The laser has integrated electronics type H for control of the laser output power. It is a low noise laser source (0.1 % RMS,@<1 MHz) with reduced coherence length and operates mode-hopping free. Due to the reduced coherence length the speckle contrast might be lowered. Please note that this effect is smaller for smaller lines and spots. The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

The working distance can be adjusted by adjusting the focus setting. Please note that beam parameters like line length and line width increase proportionally to the working distance.

A fine-adjustment of the distance between laser and target is recommended for fine-focusing.

Technical data

LNC-5LM15-S88+56CM-785-2-M10-A8-H-6

Series
5LM
Order Code
LNC-5LM15-S88+56CM-785-2-M10-A8-H-6
Line profile
Gaussian Intensity Distribution
Line type
Laser Micro Line
Wavelength
785 +15/-15 nm
Laser output power
2 mW
Laser safety class
3R
Fan angle α
15 deg
Focussing range
65-120 mm
Working distance
78 mm
Line length
21.9 mm
Line width
0.034 mm
Rayleigh range
2.29 mm
Edge intensity
33 %
Diameter laser module
25/28 mm
Module length
86.8 mm
Installation length
194.8 mm
Cable length
1.5 m
Connector type
Lumberg SV50 IEC 61076-2-106
Supply voltage
5 ± 0.2 V
Max. current consumption
0.25 A
Working temperature
0 - 40 °C
Modulation inputs
Analog
TTL
Input resistance
22 kOhm
22 kOhm
Max. modulation frequency
100 kHz
100 kHz
Modulation delay ON/OFF
2/0.3 µs
1.5/0.1 µs
Rise / Fall time
1/1 µs
1/1 µs
Noise (< 1 MHZ RMS)
0.1 %

Accessories

50HD-15
Hex key WS 1.5
9D-12
Screwdriver WS 1.2
13MK-25-36-10-F
Mounting Console with flat base plate
13MK-25-36-10-M
Mounting Console with base plate with dovetail profile
PS051003E
Power Supply 5 V