Start // Laser for Machine Vision // Llg // Semi-telecentric Macro Line Generator Semi-telecentric Low Noise Macro Line Generator by Schäfter + Kirchhoff - LNC-13LTM-500-41+91CR-520-4-O11-M60-HP-4

LNC-13LTM-500-41+91CR-520-4-O11-M60-HP-4

Semi-telecentric Macro Line Generator Semi-telecentric Low Noise Macro Line Generator

LNC-13LTM-500-41+91CR-520-4-O11-M60-HP-4
LNC-13LTM-500-41+91CR-520-4-O11-M60-HP-4
Macro Line Generator for extended depth of focusMacro
Line
Low noise, low coherence laser moduleLow
Coherence

Features

Semi-telecentric laser line with constant line length 15mm, approx. uniform intensity distribution and extended depth of focus.
  • Line length: 15 mm
  • Line width: 94 µm
  • Wavelength: 520 nm
  • Working distance: 488 mm
  • Depth of focus: 36.2 mm
  • Low noise laser module (0.1 % RMS, @<1 MHz)

Description

The laser diode beam source type LNC-13LTM-500-41+91CR-520-4-O11-M60-HP-4 produces a semi-telecentric laser line with 15 mm line length and extended depth of focus. The intensity profile is approx. uniform in line direction. More precisely, it is Gaussian clipped by an aperture with an edge intensity of 77 %. The line width is constant along the laser line. Across the laser line the intensity distribution is approx. Gaussian.

The laser has integrated electronics type HP with micro-controller for control of the laser output power. It is a low noise laser source (0.1 % RMS,@<1 MHz) with reduced coherence length and operates mode-hopping free. Due to the reduced coherence length the speckle contrast might be lowered. Please note that this effect is smaller for smaller lines and spots. The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

For this laser type the working distance is fixed. A fine-adjustment of the distance between laser and target is recommended for fine-focusing in order to achieve minimal line width.

Technical data

LNC-13LTM-500-41+91CR-520-4-O11-M60-HP-4

Series
13LTM
Order Code
LNC-13LTM-500-41+91CR-520-4-O11-M60-HP-4
Line profile
Constant Intensity Distribution
Line type
Laser Macro Line
Wavelength
520 +10/-5 nm
Laser output power
4 mW
Laser safety class
3R
Focussing range
488-488 mm
Working distance
488 mm
Line length
15 mm
Line width
0.094 mm
Depth of focus
36.2 mm
Edge intensity
77 %
Diameter laser module
25/28 mm
Module length
139.8 mm
Installation length
627.8 mm
Cable length
1.5 m
Connector type
Lumberg SV40 IEC 61076-2-106
Supply voltage
12 ± 0.5 V
Max. current consumption
0.3 A
Working temperature
15 - 40 °C
Modulation inputs
Analog
TTL
Input resistance
9 kOhm
9 kOhm
Max. modulation frequency
0.001 kHz
300 kHz
Modulation delay ON/OFF
2000/500 µs
0.5/0.2 µs
Rise / Fall time
200000/200000 µs
0.8/0.3 µs
Noise (< 1 MHZ RMS)
0.1 %

Accessories

9D-12
Screwdriver WS 1.2
PS120516E
Power Supply 12 V