Start // Laser for Machine Vision // Llg // LNC-13LTM-330-41+91CR-635-1-H10-M60-H-6

LNC-13LTM-330-41+91CR-635-1-H10-M60-H-6

Semi-telecentric Macro Line Generator Semi-telecentric Low Noise Macro Line Generator

Features

Semi-telecentric laser line with constant line length 15mm, approx. uniform intensity distribution and extended depth of focus.
  • Line length: 15 mm
  • Line width: 76 µm
  • Wavelength: 635 nm
  • Working distance: 318 mm
  • Depth of focus: 19.3 mm
  • Low noise laser module (0.1 % RMS, @<1 MHz)
  • Macro Line Generator for extended depth of focus
  • Low noise, low coherence laser module (typ. < 0.15 % of Po (RMS, Bandwidth < 1 MHz))

Description

The laser diode beam source type LNC-13LTM-330-41+91CR-635-1-H10-M60-H-6 produces a semi-telecentric laser line with 15 mm line length and extended depth of focus. The intensity profile is approx. uniform in line direction. More precisely, it is Gaussian clipped by an aperture with an edge intensity of 84 %. The line width is constant along the laser line. Across the laser line the intensity distribution is approx. Gaussian.

The laser has integrated electronics type H for control of the laser output power. It is a low noise laser source (0.1 % RMS,@<1 MHz) with reduced coherence length and operates mode-hopping free. Due to the reduced coherence length the speckle contrast might be lowered. Please note that this effect is smaller for smaller lines and spots. The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

For this laser type the working distance is fixed. A fine-adjustment of the distance between laser and target is recommended for fine-focusing in order to achieve minimal line width.

Technical data

LNC-13LTM-330-41+91CR-635-1-H10-M60-H-6

Series
13LTM
Order Code
LNC-13LTM-330-41+91CR-635-1-H10-M60-H-6
Line profile
Constant Intensity Distribution
Line type
Laser Macro Line
Wavelength
635 +10/-10 nm
Laser output power
1 mW
Laser safety class
3R
Focussing range
318-318 mm
Working distance
318 mm
Line length
15 mm
Line width
0.076 mm
Depth of focus
19.3 mm
Edge intensity
84 %
Diameter laser module
25/28 mm
Module length
139.8 mm
Installation length
457.8 mm
Cable length
1.5 m
Connector type
Lumberg SV50 IEC 61076-2-106
Supply voltage
5 ± 0.2 V
Max. current consumption
0.25 A
Working temperature
0 - 40 °C
Modulation inputs
Analog
TTL
Input resistance
22 kOhm
22 kOhm
Max. modulation frequency
100 kHz
100 kHz
Modulation delay ON/OFF
2/0.3 µs
1.5/0.1 µs
Rise / Fall time
1/1 µs
1/1 µs
Noise (< 1 MHZ RMS)
0.1 %

Accessories

Screwdriver WS 1.2
Power Supply 5 V
For laser diode beam sources of electronics type S/C/P/H and 5 V power supply