Start // Laser for Machine Vision // Llg // Semi-telecentric Macro Line Generator Semi-telecentric Low Noise Macro Line Generator by Schäfter + Kirchhoff - LNC-13LTM-1000-41+91CR-785-0-M10-M60-H-6

LNC-13LTM-1000-41+91CR-785-0-M10-M60-H-6

Semi-telecentric Macro Line Generator Semi-telecentric Low Noise Macro Line Generator

LNC-13LTM-1000-41+91CR-785-0-M10-M60-H-6
LNC-13LTM-1000-41+91CR-785-0-M10-M60-H-6
Macro Line Generator for extended depth of focusMacro
Line
Low noise, low coherence laser moduleLow
Coherence

Features

Semi-telecentric laser line with constant line length 15mm, approx. uniform intensity distribution and extended depth of focus.
  • Line length: 15 mm
  • Line width: 285 µm
  • Wavelength: 785 nm
  • Working distance: 988 mm
  • Depth of focus: 219 mm
  • Low noise laser module (0.1 % RMS, @<1 MHz)

Description

The laser diode beam source type LNC-13LTM-1000-41+91CR-785-0-M10-M60-H-6 produces a semi-telecentric laser line with 15 mm line length and extended depth of focus. The intensity profile is approx. uniform in line direction. More precisely, it is Gaussian clipped by an aperture with an edge intensity of 85 %. The line width is constant along the laser line. Across the laser line the intensity distribution is approx. Gaussian.

The laser has integrated electronics type H for control of the laser output power. It is a low noise laser source (0.1 % RMS,@<1 MHz) with reduced coherence length and operates mode-hopping free. Due to the reduced coherence length the speckle contrast might be lowered. Please note that this effect is smaller for smaller lines and spots. The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

For this laser type the working distance is fixed. A fine-adjustment of the distance between laser and target is recommended for fine-focusing in order to achieve minimal line width.

Technical data

LNC-13LTM-1000-41+91CR-785-0-M10-M60-H-6

Series
13LTM
Order Code
LNC-13LTM-1000-41+91CR-785-0-M10-M60-H-6
Line profile
Constant Intensity Distribution
Line type
Laser Macro Line
Wavelength
785 +15/-15 nm
Laser output power
0 mW
Focussing range
988-988 mm
Working distance
988 mm
Line length
15 mm
Line width
0.285 mm
Depth of focus
219 mm
Edge intensity
85 %
Diameter laser module
25/28 mm
Module length
139.8 mm
Installation length
1127.8 mm
Cable length
1.5 m
Connector type
Lumberg SV50 IEC 61076-2-106
Supply voltage
5 ± 0.2 V
Max. current consumption
0.25 A
Working temperature
0 - 40 °C
Modulation inputs
Analog
TTL
Input resistance
22 kOhm
22 kOhm
Max. modulation frequency
100 kHz
100 kHz
Modulation delay ON/OFF
2/0.3 µs
1.5/0.1 µs
Rise / Fall time
1/1 µs
1/1 µs
Noise (< 1 MHZ RMS)
0.1 %

Accessories

9D-12
Screwdriver WS 1.2
PS051003E
Power Supply 5 V