Start // Laser for Machine Vision // Llg // Semi-telecentric Low Noise Micro Line Generator by Schäfter + Kirchhoff - LNC-13LT-4000+91CR-520-7-O11-M60-HP-4

LNC-13LT-4000+91CR-520-7-O11-M60-HP-4

Semi-telecentric Low Noise Micro Line Generator

LNC-13LT-4000+91CR-520-7-O11-M60-HP-4
LNC-13LT-4000+91CR-520-7-O11-M60-HP-4

Features

Semi-telecentric laser line with constant line length 15mm and approx. uniform intensity distribution.
  • Line length: 15 mm
  • Line width: 240 µm
  • Wavelength: 520 nm
  • Working distance: 3993 mm
  • Low noise laser module (0.1 % RMS, @<1 MHz)
  • Micro Line Generator for small laser line widths and high power density in the focal plane
  • Low noise, low coherence laser module (typ. < 0.15 % of Po (RMS, Bandwidth < 1 MHz))
Micro Line Generator for small laser line widths and high power density in the focal planeLow noise, low coherence laser module

Description

The laser diode beam source type LNC-13LT-4000+91CR-520-7-O11-M60-HP-4 produces a semi-telecentric laser line with 15 mm line length. The intensity profile is approx. uniform in line direction. More precisely, it is Gaussian clipped by an aperture with an edge intensity of 77 %. The line width is constant along the laser line. Across the laser line the intensity distribution is Gaussian.

The laser has integrated electronics type HP with micro-controller for control of the laser output power. It is a low noise laser source (0.1 % RMS,@<1 MHz) with reduced coherence length and operates mode-hopping free. Due to the reduced coherence length the speckle contrast might be lowered. Please note that this effect is smaller for smaller lines and spots. The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

For this laser type the working distance is fixed. A fine-adjustment of the distance between laser and target is recommended for fine-focusing in order to achieve minimal line width.

Technical data

LNC-13LT-4000+91CR-520-7-O11-M60-HP-4

Series
13LT
Order Code
LNC-13LT-4000+91CR-520-7-O11-M60-HP-4
Line profile
Constant Intensity Distribution
Line type
Laser Micro Line
Wavelength
520 +10/-5 nm
Laser output power
7 mW
Laser safety class
3B
Focussing range
3993-3993 mm
Working distance
3993 mm
Line length
15 mm
Line width
0.24 mm
Rayleigh range
175 mm
Edge intensity
77 %
Diameter laser module
25/28 mm
Module length
134.4 mm
Installation length
4127.4 mm
Cable length
1.5 m
Connector type
Lumberg SV40 IEC 61076-2-106
Supply voltage
12 ± 0.5 V
Max. current consumption
0.3 A
Working temperature
15 - 40 °C
Modulation inputs
Analog
TTL
Input resistance
9 kOhm
9 kOhm
Max. modulation frequency
0.001 kHz
300 kHz
Modulation delay ON/OFF
2000/500 µs
0.5/0.2 µs
Rise / Fall time
200000/200000 µs
0.8/0.3 µs
Noise (< 1 MHZ RMS)
0.1 %

Accessories

9D-12
Screwdriver WS 1.2
PS120516E
Power Supply 12 V