Start // Laser for Machine Vision // Llg // Semi-telecentric Low Noise Micro Line Generator by Schäfter + Kirchhoff - LNC-13LT-1000+91CM-639-4-H18-M60-H-6

LNC-13LT-1000+91CM-639-4-H18-M60-H-6

Semi-telecentric Low Noise Micro Line Generator

LNC-13LT-1000+91CM-639-4-H18-M60-H-6
LNC-13LT-1000+91CM-639-4-H18-M60-H-6

Features

Semi-telecentric laser line with constant line length 15mm and approx. uniform intensity distribution.
  • Line length: 15 mm
  • Line width: 58 µm
  • Wavelength: 639 nm
  • Working distance: 993 mm
  • Low noise laser module (0.1 % RMS, @<1 MHz)
  • Micro Line Generator for small laser line widths and high power density in the focal plane
  • Low noise, low coherence laser module (typ. < 0.15 % of Po (RMS, Bandwidth < 1 MHz))
Micro Line Generator for small laser line widths and high power density in the focal planeLow noise, low coherence laser module

Description

The laser diode beam source type LNC-13LT-1000+91CM-639-4-H18-M60-H-6 produces a semi-telecentric laser line with 15 mm line length. The intensity profile is approx. uniform in line direction. More precisely, it is Gaussian clipped by an aperture with an edge intensity of 87 %. The line width is constant along the laser line. Across the laser line the intensity distribution is Gaussian.

The laser has integrated electronics type H for control of the laser output power. It is a low noise laser source (0.1 % RMS,@<1 MHz) with reduced coherence length and operates mode-hopping free. Due to the reduced coherence length the speckle contrast might be lowered. Please note that this effect is smaller for smaller lines and spots. The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

For this laser type the working distance is fixed. A fine-adjustment of the distance between laser and target is recommended for fine-focusing in order to achieve minimal line width.

Technical data

LNC-13LT-1000+91CM-639-4-H18-M60-H-6

Series
13LT
Order Code
LNC-13LT-1000+91CM-639-4-H18-M60-H-6
Line profile
Constant Intensity Distribution
Line type
Laser Micro Line
Wavelength
639 +10/-10 nm
Laser output power
4 mW
Laser safety class
3R
Focussing range
993-993 mm
Working distance
993 mm
Line length
15 mm
Line width
0.058 mm
Rayleigh range
8.3 mm
Edge intensity
87 %
Diameter laser module
25/28 mm
Module length
131.4 mm
Installation length
1154.4 mm
Cable length
1.5 m
Connector type
Lumberg SV50 IEC 61076-2-106
Supply voltage
5 ± 0.2 V
Max. current consumption
0.25 A
Working temperature
0 - 40 °C
Modulation inputs
Analog
TTL
Input resistance
22 kOhm
22 kOhm
Max. modulation frequency
100 kHz
100 kHz
Modulation delay ON/OFF
2/0.3 µs
1.5/0.1 µs
Rise / Fall time
1/1 µs
1/1 µs
Noise (< 1 MHZ RMS)
0.1 %

Accessories

9D-12
Screwdriver WS 1.2
PS051003E
Power Supply 5 V