Start // Laser for Machine Vision // Llg // Low Noise Macro Line Generator with a fan angle by Schäfter + Kirchhoff - LNC-13LNM40-S1000-7+91CM-685-6-H13-M60-H-6

LNC-13LNM40-S1000-7+91CM-685-6-H13-M60-H-6

Low Noise Macro Line Generator with a fan angle

LNC-13LNM40-S1000-7+91CM-685-6-H13-M60-H-6
LNC-13LNM40-S1000-7+91CM-685-6-H13-M60-H-6

Features

Laser line with a fan angle, approx. uniform intensity distribution and extended depth of focus.
  • Line length: 300 mm
  • Line width: 141 µm
  • Wavelength: 685 nm
  • Working distance: 963.5 mm
  • Depth of focus: 62.3 mm
  • Low noise laser module (0.1 % RMS, @<1 MHz)
  • Macro Line Generator for extended depth of focus
  • Low noise, low coherence laser module (typ. < 0.15 % of Po (RMS, Bandwidth < 1 MHz))
Macro Line Generator for extended depth of focusLow noise, low coherence laser module

Description

The laser diode beam source type LNC-13LNM40-S1000-7+91CM-685-6-H13-M60-H-6 has a fan angle of 16.8°, approx. uniform intensity distribution along the laser line and extended depth of focus.

More precisely, it is Gaussian clipped by an aperture with an edge intensity of 75 %. Across the laser line the intensity distribution is Gaussian.

The laser has integrated electronics type H for control of the laser output power. It is a low noise laser source (0.1 % RMS,@<1 MHz) with reduced coherence length and operates mode-hopping free. Due to the reduced coherence length the speckle contrast might be lowered. Please note that this effect is smaller for smaller lines and spots. The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

For this laser type the working distance is fixed. A fine-adjustment of the distance between laser and target is recommended for fine-focusing in order to achieve minimal line width.

Technical data

LNC-13LNM40-S1000-7+91CM-685-6-H13-M60-H-6

Series
13LNM40
Order Code
LNC-13LNM40-S1000-7+91CM-685-6-H13-M60-H-6
Line profile
Constant Intensity Distribution
Line type
Laser Macro Line
Wavelength
685 +10/-10 nm
Laser output power
6 mW
Laser safety class
3B
Fan angle α
16.8 deg
Focussing range
963.5-963.5 mm
Working distance
963.5 mm
Line length
300 mm
Line width
0.141 mm
Depth of focus
62.3 mm
Edge intensity
75 %
Diameter laser module
25/28 mm
Module length
143.9 mm
Installation length
1137.4 mm
Cable length
1.5 m
Connector type
Lumberg SV50 IEC 61076-2-106
Supply voltage
5 ± 0.25 V
Max. current consumption
0.25 A
Working temperature
0 - 40 °C
Modulation inputs
Analog
TTL
Input resistance
22 kOhm
22 kOhm
Max. modulation frequency
100 kHz
100 kHz
Modulation delay ON/OFF
2/0.3 µs
1.5/0.1 µs
Rise / Fall time
1/1 µs
1/1 µs
Noise (< 1 MHZ RMS)
0.1 %

Downloads

Benefits of user registration include

  • Extended information for download including stepfiles, software or manuals
  • Direct download of user-specific downloads (e.g. user-specific software)
  • Access to previous online requests and the possibility to add complete previous lists to the "Request for quote" list
  • Stored item list
Click here to register.

Accessories

9D-12
Screwdriver WS 1.2
PS051003E
Power Supply 5 V