Start // Laser for Machine Vision // Llg // Low Noise Micro Line Generator with a fan angle by Schäfter + Kirchhoff - LNC-13LN40-M100+91CR-640-7-H22-M60-H-6

LNC-13LN40-M100+91CR-640-7-H22-M60-H-6

Low Noise Micro Line Generator with a fan angle

LNC-13LN40-M100+91CR-640-7-H22-M60-H-6
LNC-13LN40-M100+91CR-640-7-H22-M60-H-6

Features

Laser line with a fan angle, approx. uniform intensity distribution and very thin lines.
  • Line length: 32 mm
  • Line width: 7 µm
  • Wavelength: 640 nm
  • Working distance: 92.5 mm
  • Low noise laser module (0.1 % RMS, @<1 MHz)
  • Micro Line Generator for small laser line widths and high power density in the focal plane
  • Low noise, low coherence laser module (typ. < 0.15 % of Po (RMS, Bandwidth < 1 MHz))
Micro Line Generator for small laser line widths and high power density in the focal planeLow noise, low coherence laser module

Description

The laser diode beam source type LNC-13LN40-M100+91CR-640-7-H22-M60-H-6 has a fan angle of 10° and approx. uniform intensity distribution along the laser line.

More precisely, it is Gaussian clipped by an aperture with an edge intensity of 74 %. Across the laser line the intensity distribution is Gaussian. The line width is constant along 60 % of the central are, outside this area the line width differs up to 30 %.

The laser has integrated electronics type H for control of the laser output power. It is a low noise laser source (0.1 % RMS,@<1 MHz) with reduced coherence length and operates mode-hopping free. Due to the reduced coherence length the speckle contrast might be lowered. Please note that this effect is smaller for smaller lines and spots. The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

For this laser type the working distance is fixed. A fine-adjustment of the distance between laser and target is recommended for fine-focusing in order to achieve minimal line width.

Technical data

LNC-13LN40-M100+91CR-640-7-H22-M60-H-6

Series
13LN40
Order Code
LNC-13LN40-M100+91CR-640-7-H22-M60-H-6
Line profile
Constant Intensity Distribution
Line type
Laser Micro Line
Wavelength
640 +5/-5 nm
Laser output power
7 mW
Laser safety class
3B
Fan angle α
10 deg
Focussing range
92.5-92.5 mm
Working distance
92.5 mm
Line length
32 mm
Line width
0.007 mm
Rayleigh range
0.083 mm
Edge intensity
74 %
Diameter laser module
25/28 mm
Module length
138.4 mm
Installation length
230.9 mm
Cable length
1.5 m
Connector type
Lumberg SV50 IEC 61076-2-106
Supply voltage
5 ± 0.2 V
Max. current consumption
0.25 A
Working temperature
0 - 40 °C
Modulation inputs
Analog
TTL
Input resistance
22 kOhm
22 kOhm
Max. modulation frequency
100 kHz
100 kHz
Modulation delay ON/OFF
2/0.3 µs
1.5/0.1 µs
Rise / Fall time
1/1 µs
1/1 µs
Noise (< 1 MHZ RMS)
0.1 %

Accessories

9D-12
Screwdriver WS 1.2
PS051003E
Power Supply 5 V