Start // Laser for Machine Vision // Llg // 5M-S325+55CM-445-76-G02-A7.5-P-6

5M-S325+55CM-445-76-G02-A7.5-P-6

Compact Laser Micro Focus Generator with elliptical Gaussian beam profile

Features

Compact Laser spot with elliptical Gaussian beam profile.
  • Spot diameter: 0.056 x 0.119 mm
  • Wavelength: 445 nm
  • Working distance: 317 mm
  • Micro Focus Generator for small spot widths and high power density in the focal plane

Description

The laser diode beam source type 5M-S325+55CM-445-76-G02-A7.5-P-6 produces an elliptical laser spot with elliptical Gaussian intensity distribution.

The laser has integrated electronics type P with micro-controller for control of the laser output power. The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

The working distance can be adjusted by adjusting the focus setting. Please note that the spot diameter increases proportionally to the working distance. A fine-adjustment of the distance between laser and target is recommended for fine-focusing.

Technical data

5M-S325+55CM-445-76-G02-A7.5-P-6

Series
5M
Order Code
5M-S325+55CM-445-76-G02-A7.5-P-6
Line profile
Gaussian Intensity Distribution
Wavelength
445 +15/-5 nm
Laser output power
76 mW
Laser safety class
3B
Focussing range
260-430 mm
Working distance
317 mm
Spot height
0.119 mm
Spot width
0.056 mm
Rayleigh range
10.9 mm
Diameter laser module
25/28 mm
Module length
73.1 mm
Installation length
420.1 mm
Cable length
1.5 m
Connector type
Lumberg SV50 IEC 61076-2-106
Supply voltage
5 ± 0.2 V
Max. current consumption
0.5 A
Working temperature
15 - 40 °C
Modulation inputs
Analog
TTL
Input resistance
9 kOhm
9 kOhm
Max. modulation frequency
0.01 kHz
250 kHz
Modulation delay ON/OFF
3000/3000 µs
0.5/0.2 µs
Rise / Fall time
40000/40000 µs
0.5/0.5 µs

Accessories

Eccentric key with a stroke of ± 0.5 mm.
Alternative eccentric key with long handle with a stroke of ± 0.5 mm.
Screwdriver WS 1.2