Start // Laser for Machine Vision // Llg // Compact Laser Micro Focus Generator with elliptical Gaussian beam profile by Schäfter + Kirchhoff - 5M-A18+55CM-660-41-M26-A8-CS-7

5M-A18+55CM-660-41-M26-A8-CS-7

Compact Laser Micro Focus Generator with elliptical Gaussian beam profile

Micro Focus Generator for small spot widths and high power density in the focal planeMicro
Focus
With RS232 interface

Features

Compact Laser spot with elliptical Gaussian beam profile.
  • Spot diameter: 0.003 x 0.008 mm
  • Wavelength: 660 nm
  • Working distance: 16.5 mm

Description

The laser diode beam source type 5M-A18+55CM-660-41-M26-A8-CS-7 produces an elliptical laser spot with elliptical Gaussian intensity distribution.

The laser has integrated electronics type CS for control of the laser output power and serial interface (RS232). The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

The working distance can be adjusted by adjusting the focus setting. Please note that the spot diameter increases proportionally to the working distance. A fine-adjustment of the distance between laser and target is recommended for fine-focusing.

Technical data

5M-A18+55CM-660-41-M26-A8-CS-7

Series
5M
Order Code
5M-A18+55CM-660-41-M26-A8-CS-7
Line profile
Gaussian Intensity Distribution
Wavelength
660 +5/-5 nm
Laser output power
41 mW
Laser safety class
3B
Focussing range
15-35 mm
Working distance
16.5 mm
Spot height
0.008 mm
Spot width
0.003 mm
Rayleigh range
0.024 mm
Diameter laser module
25/28 mm
Module length
76.4 mm
Installation length
122.9 mm
Cable length
1.5 m
Connector type
Lumberg SV70 IEC 61076-2-106
Supply voltage
5 ± 0.2 V
Max. current consumption
0.25 A
Working temperature
0 - 40 °C
Modulation inputs
Analog
TTL
Input resistance
9 kOhm
9 kOhm
Max. modulation frequency
0.001 kHz
250 kHz
Modulation delay ON/OFF
3000/3000 µs
0.5/0.2 µs
Rise / Fall time
200000/200000 µs
0.8/0.4 µs
Interface
RS232

Accessories

60EX-4
Eccentric key with a stroke of ± 0.5 mm.
60EX-4-L
Alternative eccentric key with long handle with a stroke of ± 0.5 mm.
9D-12
Screwdriver WS 1.2