Start // Laser for Machine Vision // Llg // 5LPM40-S325-1+55CM-450-44-O06-A7.5-PS-7

5LPM40-S325-1+55CM-450-44-O06-A7.5-PS-7

Macro Line Generator with a large fan angle

Features

Laser line with a large fan angle, Gaussian intensity distribution and extended depth of focus.
  • Line length: 228 mm
  • Line width: 215 µm
  • Wavelength: 450 nm
  • Working distance: 312 mm
  • Depth of focus: 212 mm
  • Macro Line Generator for extended depth of focus
  • With RS232 interface

Description

The laser diode beam source type 5LPM40-S325-1+55CM-450-44-O06-A7.5-PS-7 has a fan angle of 40° and an extended depth of focus.

The intensity profile is Gaussian in line direction clipped by an aperture with an edge intensity of 15 %. The line width is constant along the laser line. Across the laser line the intensity distribution is approx. Gaussian.

The laser has integrated electronics type PS with micro-controller for control of the laser output power and serial interface (RS232). The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

The working distance can be adjusted by adjusting the focus setting. Please note that beam parameters like line length and line width increase proportionally to the working distance. A fine-adjustment of the distance between laser and target is recommended for fine-focusing.

Technical data

5LPM40-S325-1+55CM-450-44-O06-A7.5-PS-7

Series
5LPM
Order Code
5LPM40-S325-1+55CM-450-44-O06-A7.5-PS-7
Line profile
Gaussian Intensity Distribution
Line type
Laser Macro Line
Wavelength
450 +10/-10 nm
Laser output power
44 mW
Laser safety class
3B
Fan angle α
40 deg
Focussing range
255-450 mm
Working distance
312 mm
Line length
228 mm
Line width
0.215 mm
Depth of focus
212 mm
Edge intensity
15 %
Diameter laser module
25/28 mm
Module length
95.5 mm
Installation length
437.5 mm
Cable length
1.5 m
Connector type
Lumberg SV70 IEC 61076-2-106
Supply voltage
5 ± 0.2 V
Max. current consumption
0.5 A
Working temperature
15 - 40 °C
Modulation inputs
Analog
TTL
Input resistance
9 kOhm
9 kOhm
Max. modulation frequency
0.001 kHz
250 kHz
Modulation delay ON/OFF
3000/3000 µs
0.6/0.2 µs
Rise / Fall time
200000/200000 µs
0.2/0.2 µs
Interface
RS232

Accessories

Hex key WS 1.5
Screwdriver WS 1.2
Mounting Console with flat base plate
Mounting Console with base plate with Montech® profile
Power Supply 5 V for laser modules with RS232 interface
For laser diode modules with RS232 interface