Start // Laser for Machine Vision // Llg // Micro Line Generator with a large fan angle by Schäfter + Kirchhoff - 5LP80-S325+55CM-405-82-X15-A7.5-PS-7

5LP80-S325+55CM-405-82-X15-A7.5-PS-7

Micro Line Generator with a large fan angle

5LP80-S325+55CM-405-82-X15-A7.5-PS-7
5LP80-S325+55CM-405-82-X15-A7.5-PS-7

Features

Laser line with a large fan angle and Gaussian intensity distribution.
  • Line length: 565 mm
  • Line width: 84 µm
  • Wavelength: 405 nm
  • Working distance: 317 mm
  • Micro Line Generator for small laser line widths and high power density in the focal plane
  • With RS232 interface
Micro Line Generator for small laser line widths and high power density in the focal planeWith RS232 interface

Description

The laser diode beam source type 5LP80-S325+55CM-405-82-X15-A7.5-PS-7 has a fan angle of 84°.

The intensity profile is Gaussian in line direction clipped by an aperture with an edge intensity of 10 %. The line width is constant along the laser line. Across the laser line the intensity distribution is Gaussian.

The laser has integrated electronics type PS with micro-controller for control of the laser output power and serial interface (RS232). The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

The working distance can be adjusted by adjusting the focus setting. Please note that beam parameters like line length and line width increase proportionally to the working distance. A fine-adjustment of the distance between laser and target is recommended for fine-focusing.

Technical data

5LP80-S325+55CM-405-82-X15-A7.5-PS-7

Series
5LP
Order Code
5LP80-S325+55CM-405-82-X15-A7.5-PS-7
Line profile
Gaussian Intensity Distribution
Line type
Laser Micro Line
Wavelength
405 +5/-5 nm
Laser output power
82 mW
Laser safety class
3B
Fan angle α
84 deg
Focussing range
260-430 mm
Working distance
317 mm
Line length
565 mm
Line width
0.084 mm
Rayleigh range
27.4 mm
Edge intensity
10 %
Diameter laser module
25/28 mm
Module length
86.1 mm
Installation length
433.1 mm
Cable length
1.5 m
Connector type
Lumberg SV70 IEC 61076-2-106
Supply voltage
5 ± 0.2 V
Max. current consumption
0.5 A
Working temperature
15 - 40 °C
Modulation inputs
Analog
TTL
Input resistance
9 kOhm
9 kOhm
Max. modulation frequency
0.001 kHz
250 kHz
Modulation delay ON/OFF
3000/3000 µs
0.6/0.2 µs
Rise / Fall time
200000/200000 µs
0.2/0.2 µs
Interface
RS232

Accessories

50HD-15
Hex key WS 1.5
9D-12
Screwdriver WS 1.2
13MK-25-36-10-F
Mounting Console with flat base plate
13MK-25-36-10-M
Mounting Console with base plate with dovetail profile
PS051007E
Power Supply 5 V for laser modules with RS232 interface