Start // Laser for Machine Vision // Llg // 13MM-S500-4+55CM-639-11-H18-T12-CS-7

13MM-S500-4+55CM-639-11-H18-T12-CS-7

Laser Macro Focus Generator with approx. circular beam profile

Features

Laser spot with approx. circular beam profile and extended depth of focus.
  • Spot diameter: 0.164 x 0.131 mm
  • Wavelength: 639 nm
  • Working distance: 483 mm
  • Depth of focus: 44.5 mm
  • Macro Focus Generator for extended depth of focus
  • With RS232 interface

Description

The laser diode beam source type 13MM-S500-4+55CM-639-11-H18-T12-CS-7 produces a circular laser spot with extended depth of focus. The beam profile is approx. Gaussian. More precisely it has an elliptical intensity distribution clipped by a circular aperture.

The laser has integrated electronics type CS for control of the laser output power and serial interface (RS232). The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

The working distance can be adjusted by adjusting the focus setting. Please note that the spot diameter increases proportionally to the working distance. A fine-adjustment of the distance between laser and target is recommended for fine-focusing.

Technical data

13MM-S500-4+55CM-639-11-H18-T12-CS-7

Series
13MM
Order Code
13MM-S500-4+55CM-639-11-H18-T12-CS-7
Line profile
Gaussian Intensity Distribution
Wavelength
639 +10/-10 nm
Laser output power
11 mW
Laser safety class
3B
Focussing range
410-815 mm
Working distance
483 mm
Spot height
0.131 mm
Spot width
0.164 mm
Depth of focus
44.5 mm
Diameter laser module
25/28 mm
Module length
84.3 mm
Installation length
597.3 mm
Cable length
1.5 m
Connector type
Lumberg SV70 IEC 61076-2-106
Supply voltage
5 ± 0.2 V
Max. current consumption
0.25 A
Working temperature
0 - 40 °C
Modulation inputs
Analog
TTL
Input resistance
9 kOhm
9 kOhm
Max. modulation frequency
0.001 kHz
250 kHz
Modulation delay ON/OFF
3000/3000 µs
0.5/0.2 µs
Rise / Fall time
200000/200000 µs
0.8/0.4 µs
Interface
RS232

Accessories

Hex key WS 1.5
Screwdriver WS 1.2
Mounting Console with flat base plate
Mounting Console with base plate with Montech® profile
Power Supply 5 V for laser modules with RS232 interface
For laser diode modules with RS232 interface