Start // Laser for Machine Vision // Llg // 13MM-S1000-4+55CM-450-33-O06-T15-PS-7


Laser Macro Focus Generator with approx. circular beam profile


Laser spot with approx. circular beam profile and extended depth of focus.
  • Spot diameter: 0.216 x 0.186 mm
  • Wavelength: 450 nm
  • Working distance: 964 mm
  • Depth of focus: 125 mm
  • Macro Focus Generator for extended depth of focus
  • With RS232 interface


The laser diode beam source type 13MM-S1000-4+55CM-450-33-O06-T15-PS-7 produces a circular laser spot with extended depth of focus. The beam profile is approx. Gaussian. More precisely it has an elliptical intensity distribution clipped by a circular aperture.

The laser has integrated electronics type PS with micro-controller for control of the laser output power and serial interface (RS232). The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

The working distance can be adjusted by adjusting the focus setting. Please note that the spot diameter increases proportionally to the working distance. A fine-adjustment of the distance between laser and target is recommended for fine-focusing.

Technical data


Order Code
Line profile
Gaussian Intensity Distribution
450 +10/-10 nm
Laser output power
33 mW
Laser safety class
Focussing range
815-1295 mm
Working distance
964 mm
Spot height
0.186 mm
Spot width
0.216 mm
Depth of focus
125 mm
Diameter laser module
25/28 mm
Module length
84.3 mm
Installation length
1078.3 mm
Cable length
1.5 m
Connector type
Lumberg SV70 IEC 61076-2-106
Supply voltage
5 ± 0.2 V
Max. current consumption
0.5 A
Working temperature
15 - 40 °C
Modulation inputs
Input resistance
9 kOhm
9 kOhm
Max. modulation frequency
0.001 kHz
250 kHz
Modulation delay ON/OFF
3000/3000 µs
0.6/0.2 µs
Rise / Fall time
200000/200000 µs
0.2/0.2 µs


Hex key WS 1.5
Screwdriver WS 1.2
Mounting Console with flat base plate
Mounting Console with base plate with dovetail profile
Power Supply 5 V for laser modules with RS232 interface