Start // Laser for Machine Vision // Llg // 13M-M125+55CM-515-75-X17-T15-PS-7

13M-M125+55CM-515-75-X17-T15-PS-7

Laser Micro Focus Generator with elliptical Gaussian beam profile

Features

Laser spot with elliptical Gaussian beam profile.
  • Spot diameter: 0.009 x 0.022 mm
  • Wavelength: 515 nm
  • Working distance: 120 mm
  • Micro Focus Generator for small spot widths and high power density in the focal plane
  • With RS232 interface

Description

The laser diode beam source type 13M-M125+55CM-515-75-X17-T15-PS-7 produces an elliptical laser spot with elliptical Gaussian intensity distribution.

The laser has integrated electronics type PS with micro-controller for control of the laser output power and serial interface (RS232). The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

The working distance can be adjusted by adjusting the focus setting. Please note that the spot diameter increases proportionally to the working distance. A fine-adjustment of the distance between laser and target is recommended for fine-focusing.

Technical data

13M-M125+55CM-515-75-X17-T15-PS-7

Series
13M
Order Code
13M-M125+55CM-515-75-X17-T15-PS-7
Line profile
Gaussian Intensity Distribution
Wavelength
515 +5/-5 nm
Laser output power
75 mW
Laser safety class
3B
Focussing range
110-205 mm
Working distance
120 mm
Spot height
0.022 mm
Spot width
0.009 mm
Rayleigh range
0.232 mm
Diameter laser module
25/28 mm
Module length
75.9 mm
Installation length
225.9 mm
Cable length
1.5 m
Connector type
Lumberg SV70 IEC 61076-2-106
Supply voltage
5 ± 0.2 V
Max. current consumption
0.5 A
Working temperature
15 - 40 °C
Modulation inputs
Analog
TTL
Input resistance
9 kOhm
9 kOhm
Max. modulation frequency
0.001 kHz
250 kHz
Modulation delay ON/OFF
3000/3000 µs
0.6/0.2 µs
Rise / Fall time
200000/200000 µs
0.2/0.2 µs
Interface
RS232

Accessories

Hex key WS 1.5
Screwdriver WS 1.2
Mounting Console with flat base plate
Mounting Console with base plate with Montech® profile
Power Supply 5 V for laser modules with RS232 interface
For laser diode modules with RS232 interface