Start // Laser for Machine Vision // Llg // Laser Macro Line Generator with a fan angle by Schäfter + Kirchhoff - 13LRM25-S000-1.5+55CM-639-11-H18-T15-CS-7

13LRM25-S000-1.5+55CM-639-11-H18-T15-CS-7

Laser Macro Line Generator with a fan angle

13LRM25-S000-1.5+55CM-639-11-H18-T15-CS-7

Features

Laser line with a fan angle, approx. uniform intensity distributionand extended depth of focus.
  • Line length: 850 mm
  • Line width: 1230 µm
  • Wavelength: 639 nm
  • Working distance: 2000 mm
  • Depth of focus: 3000 mm
  • Macro Line Generator for extended depth of focus
  • With RS232 interface
Macro Line Generator for extended depth of focusWith RS232 interface

Description

The laser diode beam source type 13LRM25-S000-1.5+55CM-639-11-H18-T15-CS-7 has a fan angle of 25° with a constant line width and approx. uniform intensity distribution along the laser line as well an extended depth of focus.

The fine-structure is a chain of equidistant dots with a spacing of approx. 1/2 the line width. The line width is constant along the laser line. Across the laser line the intensity distribution is approx. Gaussian.

The laser has integrated electronics type CS for control of the laser output power and serial interface (RS232). The output power can be controlled using the modulation input ports (TTL and analog) or manually using the potentiometer.

The working distance can be adjusted by adjusting the focus setting. Please note that beam parameters like line length and line width increase proportionally to the working distance.

A fine-adjustment of the distance between laser and target is recommended for fine-focusing.

Technical data

13LRM25-S000-1.5+55CM-639-11-H18-T15-CS-7

Series
13LRM
Order Code
13LRM25-S000-1.5+55CM-639-11-H18-T15-CS-7
Line profile
Constant Intensity Distribution
Line type
Laser Macro Line
Wavelength
639 +10/-10 nm
Laser output power
11 mW
Laser safety class
3B
Fan angle α
25 deg
Focussing range
1330-inf mm
Working distance
2000 mm
Line length
850 mm
Line width
1.23 mm
Depth of focus
3000 mm
Edge intensity
80 %
Diameter laser module
25/28 mm
Module length
84.3 mm
Installation length
2114.3 mm
Cable length
1.5 m
Connector type
Lumberg SV70 IEC 61076-2-106
Supply voltage
5 ± 0.2 V
Max. current consumption
0.25 A
Working temperature
0 - 40 °C
Modulation inputs
Analog
TTL
Input resistance
9 kOhm
9 kOhm
Max. modulation frequency
0.001 kHz
250 kHz
Modulation delay ON/OFF
3000/3000 µs
0.5/0.2 µs
Rise / Fall time
200000/200000 µs
0.8/0.4 µs
Interface
RS232

Accessories

50HD-15
Hex key WS 1.5
9D-12
Screwdriver WS 1.2
13MK-25-36-10-F
Mounting Console with flat base plate
13MK-25-36-10-M
Mounting Console with base plate with dovetail profile
PS051007E
Power Supply 5 V for laser modules with RS232 interface